DEWALT Pressure Washers for Parts or Repair (2024)

Our auctions are always hosted at our Savage Surplus retail store located at 5505 W 123rd Street (Door E), Savage, Minnesota 55378. The auctions end Friday night at 7:00PM and our removals are always on Saturdays from 10:00AM until 2:00PM.

If you have questions or want to chat with someone about the auction, please call our main number: 952-314-8937.

If you'd like to speak with Nate, you can call him direct.

Nate: 612-578-1440

For shipping, please call or email Danny.

Danny: 612-414-0506

danny@savagesurplus.com

Inspections are always the last day of the auction (Friday) from 12:00PM - 2:00PM. If this time doesn't work for you, please call for an appointment.

For shipping inquiries, please email Danny (Danny@savagesurplus.com), or call him M-F 8:00AM-2:00PM (not on the weekend) at 612-414-0506. You can pay your K-bid balance online via your K-bid dashboard, or Danny will take your card information over the phone.

Inspection:

By Appointment Only

Auction Closing:

Fri, Aug 09, 2024

07:05 pm


Removal:

Sat, Aug 10, 2024

10:00 am - 02:00 pm


Bidding Increments:

Bid Range Minimum Increment
$0.01 - $75.00$1.00
$75.01 - $150.00$5.00
$150.01 - $250.00$10.00
$250.01 - $500.00$25.00
$500.01 - $1,000.00$50.00
$1,000.01 - $5,000.00$75.00
$5,000.01 - $50,000.00$100.00
$50,000.01 - $75,000.00$250.00
$75,000.01 - $100,000.00$500.00
$100,000.01 - $2,500,000.00$1,000.00

Buyer's PremiumCap
15.00%$1,500.00


This auction is contracted and managed by: Savage Surplus

Manager: Nate Boyer


Forms of payment: Cash, Credit Card, or Pay Online by going to your K-bid dashboard and clicking on invoices.

Removals are always Saturday (the day after the auction closes) from 10:00AM - 2:00PM. Items are expected to be picked up during this time. However, if this time doesn't work for you, please pay online and call during the removal to let us know when you will pick-up during the week. We will do our best to accommodate your schedule. We prefer these situations get picked up either Monday, or Tuesday.

  • Items that are paid: will be held for one week. After one week, a $30 storage fee will be applied. After 2 weeks, the item will be considered abandoned and will be recirculated into another auction. No refund will be given.
  • Items that are not paid: will be held for one week. After one week, the item will be recirculated into another auction and the bidder will be marked as a no-show. The bidder's account will be deactivated.

Please remember to bring adequate transportation, straps, and any needed equipment. We will not load product into unsafe vehicles.

This auction is contracted and managed by an independent affiliate. By placing a bid on this auction, you are agreeing to the auction specific terms listed on this page in additions to the K-BID user terms and agreements.

K-BID Online, Inc. (K-BID) is responsible for maintaining the K-BID.com website. K-BID.com serves as the venue used by independent auction companies (Affiliates) to present their online auctions to bidders.

K-BID’s role in the auctions listed on K-BID.com is limited to providing the venue for affiliate auctions. Affiliates are not employees, agents, representatives or partners of K-BID Online, Inc. K-BID’s knowledge about individual auctions and individual auction transactions is limited to the information appearing on the website.

By placing a bid on K-BID.com, bidders are verifying they are at least 18 years old and acknowledging they understand and will comply with both the K-BID.com website terms and the auction specific terms. Bidders MUST NOT share their password or account information with anyone. Bidders are responsible for bids placed on their account.

Inspection dates/times are available for every auction. Bidders are strongly encouraged to inspect prior to placing bids.Removal day is not inspection day. When an auction ends, and the winning bidder invoice appears on the bidder’s dashboard, the bidder is obligated to honor their bid(s).

Every auction item is sold “as is, where is” with no guarantees or warranties. You are responsible for inspecting items prior to purchase.

Bidders are responsible for knowing and complying with auction terms. Failure to comply with removal terms may result in bidding privileges being disabled. Once a bid is placed it cannot be retracted.

Sellers and their agents are prohibited from bidding on their own assets.

Items with a reserve will not be sold unless the reserve price has been met.

At the close of the auction, active items will remain open until no bids have been received for three minutes.

Applicable sales tax will be collected by the affiliate managing the auction.

In the event that bidding rights are terminated due to no-show invoices, bidders MAY be reinstated at the discretion of K-BID only after a penalty fee of 20% of the unpaid invoice(s) and a reinstatement fee of $25.00 has been paid to K-BID and a scanned copy of your driver's license emailed to us. INVOICED ITEMS WILL NOT BE AWARDED. The payment is punitive and meant to deter no-shows. Duplicate bidder accounts will be deactivated when they are determined to exist. If possible and at our discretion, K-BID reserves the right to delete any bid we believe has been placed by a suspect bidder. Any registration that shows up on our fraud detection system may be placed on hold and bids removed until the user is verified. K-BID Online, Inc reserves the right to disallow anybody from bidding on its website. Cases of obvious bidding with no intent to redeem will be referred to appropriate legal authorities.

Affiliates may lower a lot reserve at any time before or after an auction closes. If the reserve is lowered while the auction is in progress, the applicable reserve message will appear below the Next Required Bid information (Reserve Not Met or Reserve Has Been Met); the asset will sell to the high bidder if the lowered reserve amount is met. If the reserve is lowered after the auction closes, the highest bidder at auction close will receive a winning bidder invoice.

Once an auction begins its closing process, outbid notifications will not be sent.

Once a bid is placed it cannot be retracted.

5505 W 123rd Street
Savage
MN, 55378


Phone: 612-578-1440

Shipping is available in the continental US.

Shipping will be conducted via Speedee, or Fedex. You will be charged the actual shipping rate, plus $12.00 handling.

For shipping inquiries, please email Danny (Danny@savagesurplus.com), or call him M-F 8:00AM-2:00PM (not on the weekend) at 612-414-0506. You can pay your K-bid balance online via your K-bid dashboard, or Danny will take your card information over the phone.

DEWALT Pressure Washers for Parts or Repair (2024)

FAQs

What is the most common problem with pressure washers? ›

Low Pressure Output

A pressure washer losing its punch is a common issue, often resulting from a clogged nozzle or a failing pump. Start by inspecting and cleaning the nozzle with a small pin to remove any debris. If the problem persists, examine the pump for signs of damage or wear.

Why did my DeWalt pressure washer lose pressure? ›

Pressure may decrease if your packing is worn out or if there are abrasives or severe cavitation (bubbles) in the pumped fluids. This can be caused by an inadequate amount of water and/or a lack of proper filtration.

How many PSI is a good pressure washer? ›

Ideal PSI for Residential Use

For most home cleaning tasks, a pressure washer with a PSI range of 1300 to 2400 is often sufficient. This range is ideal for: Light-duty tasks: Cleaning patio furniture, bicycles, and small decks usually requires a pressure washer with a PSI of 1300 to 1700.

How to fix a pressure washer that stopped working? ›

Check the nozzle, spray gun and inlet screens for clogs. Check the O-rings and replace them if they're damaged or dirty. Unfurl the pressure washer hose reel and check the hose for twists, kinks and leaks. Ensure you're using the correct wand size for your machine.

What is the life expectancy of a pressure washer? ›

It depends on the pressure washing equipment you purchase. New pressure washers will be rated with a number of hours they should last. For example, if it is rated 500 hours and you use it fewer than 50 hours throughout the year then it will last you more than ten years as long as you keep it well maintained.

How do I know if my pressure washer unloader is bad? ›

Water leaks and inconsistent behavior are also signs of a potential failure in the near future. González: The typical signal when there is an unloader malfunction is a reduction of flow through the nozzle, which results in pressure loss. Dean: Typical symptom of an unloader failure is a sudden smooth pressure loss.

How can you tell if your pressure washer pump is bad? ›

Recognizing these five warning signs of a failing pressure washer pump can help you avoid costly downtime and prolong the life of your equipment:
  1. You experience a decrease in pressure or none at all. ...
  2. You hear unusual noises. ...
  3. You see leaks or drips. ...
  4. The pump cycles on and off often. ...
  5. Your pressure washer is old.
Mar 11, 2024

Why does my power washer not have enough pressure? ›

The number one cause of low or no pressure when using a pressure washer is a blocked or worn nozzle. Blocked nozzles will prevent water from escaping, while a worn nozzle will allow too much water to pass through, causing the pressure to drop.

Is 2000 PSI enough to clean concrete? ›

Yes, you can clean concrete using a 2,000 PSI pressure washer. With 2,000 PSI of power, you will have to spend more time cleaning the concrete for a complete clean, but you can still get optimal results.

How many PSI do I need to clean concrete? ›

Concrete cleaning calls for powerful pressure washers featuring high pressure levels of 3000 PSI. However, if you will be using the power cleaner to maintain a range of surfaces in addition to concrete, choose one with adjustable pressure levels and set it to about 3000 PSI when you need to clean concrete.

How many PSI pressure washer to wash a car? ›

What psi should I use to pressure wash my car? For most cars, a psi between 1200 and 2200 is recommended. This range provides enough cleaning power to remove dirt and grime without damaging the car's paint or delicate surfaces. Yes, you can use soap with a pressure washer.

Why do pressure washers fail? ›

Pressure washers can stop working for a variety of reasons. If your engine won't run, the carburetor may be clogged with old fuel. Low water pressure is likely from clogs, kinks, or hose trouble. Leaks may be a sign of damage or a worn-out valve.

What causes a pressure washer to stop running? ›

Well, there can be a lot happening within the parts of a pressure washer but some of the most common causes why it starts and dies are issues related to spark arrestor, fuel filter, fuel cap, carburetor, and clogging of the pressure washer filter.

Do pressure washers lose pressure over time? ›

Overtime the intense water pressure can cause the nozzle to become worn out, plugged or misshapen. This causes more water to flow through the nozzle, diminishing the pressure.

Why does my pressure washer lose pressure when I pull the trigger? ›

The number one cause of low or no pressure when using a pressure washer is a blocked or worn nozzle. Blocked nozzles will prevent water from escaping, while a worn nozzle will allow too much water to pass through, causing the pressure to drop.

Why does my pressure washer bog down when I pull the trigger? ›

For electric pressure washers this is normal operation and the motor should start up again once the trigger is engaged. If this is a gas powered pressure washer, then the pump is not going into by-pass mode and the pressure build up is overloading the engine causing it to shut down.

Why do pressure washer pumps go bad? ›

Repeated heavy use of a pressure washer can cause heat damage over time. Extra hard use can cause pump meltdown. The internal parts get so hot, they actually melt and bind up the pump. This kind of damage requires the pump to be replaced.

What is a high PSI for pressure washer? ›

Light Pressure – Rated at 2,000 PSI or lower. Medium Pressure – Rated from 2,000 to 3,000 PSI. High Pressure – Rated from 3,000 to 6,900 PSI. Ultra-High Pressure – Rated from 7,000 to 50,000 PSI.

Top Articles
Latest Posts
Article information

Author: Domingo Moore

Last Updated:

Views: 6076

Rating: 4.2 / 5 (73 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Domingo Moore

Birthday: 1997-05-20

Address: 6485 Kohler Route, Antonioton, VT 77375-0299

Phone: +3213869077934

Job: Sales Analyst

Hobby: Kayaking, Roller skating, Cabaret, Rugby, Homebrewing, Creative writing, amateur radio

Introduction: My name is Domingo Moore, I am a attractive, gorgeous, funny, jolly, spotless, nice, fantastic person who loves writing and wants to share my knowledge and understanding with you.